Used 50 Ton Phi Hydraulic Molding & Laminating Press
ConditionUsed
1 available
50 Ton PHI, 4 post, Upstroke, 4-opening, 6" str., 25" DL, 18" x 18" heated platens, #29514
50 TON PHI HYDRAULIC MOLDING & LAMINATING PRESS
Model 50-1818-5ECS-N-YS8-L
4 post upstroke type
4 opening
Floor standing
Distance between 2.5" dia. posts: 21" L-R x 12" F-B
Platen area (nominal): 19" L-R x 19" F-B
Overall dimensions of platen: 28" L-R x 19" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 25" maximum
Daylight opening between
hot plates (4): 2.5" maximum each
Hot plates (5): 18" L-R x 18" F-B x 2.5" thick
(Electrically heated to 450° F. -
water cooled)
Insulation (2): 18" L-R x 18" F-B x 1" thick
Main ram diameter (1): 6.5" @ 3000 PSI - 50 tons
Floor to top of moving platen: 43"
Power unit (base of press): Vickers hydraulic pump, driven by
1 HP 1800 RPM 230/460/3/60 motor
Racine hydraulic pump, driven by
1 HP 1200 RPM 230/460/3/60 motor
Speeds approx.: 29"/min. closing
1.6"/min. pressing to 50 tons
Gravity return
Weight approx. 4000 lbs.
Overall dimensions approx. 60" L-R x 36" F-B x 81" H
Serial no. 79-9-011
Stock no. 29514
ON LOCATION, CALIFORNIA SHIP POINT
Controls:
Pushbutton operation w/stroke & pressure control
Dual operator pushbuttons
Selector switch for manual or semi-automatic operation
Cure timers for preheat, cure, cool
(5) digital temperature indicating controllers
Low & high pressure gauges
We use cookies to improve your experience. Privacy Policy.