Equipment
Hydraulic Presses
Shop and H Frame Press
New 70 Ton Dake Force 70 H-Frame Press
Unavailable

New 70 Ton Dake Force 70 H-Frame Press

Sell Your DAKE FORCE 70
Shop and H Frame Press
Manufacturer:
DAKE
Model:
FORCE 70
Condition:
New OEM Stock
70 Ton Dake Model Force 70, 35" Btw Uprights, 19" Ram Travel
Tonnage70 T63.503 t
Stroke19"482.6 mm
Daylight7-1/2" - 32"812.8 mm
Bed (L-R)35"889 mm
Up or Downstroke?DownstrokeDownstroke
IPM Closing42 in/min.106.7 cm/min.
IPM Pressing4 in/min.10.2 cm/min.
Dimensions63" x 27" X 88" H63" x 27" X 88" H
Weight1595 lbs.1595 lbs.

New 70 Ton Dake Force 70 H-Frame Press
Electric Operation
Model Number: Force 70
Capacity: 70 Tons
Motor: 2 HP 220V 3-Phase
Width Between Uprights: 35"
Width Between Table Channels: 8"
Ram To Table: 7-1/4" - 32"
Ram Travel: 19"
Footprint: 63" x 27"
Height: 88"
Weight: 1595 lbs.
Base: 63" x 27"
Ram Advance Speed: 42"/minute
Pressing Speed: 4"/minute

Specifications are accurate to the best of our knowledge, subject to verification.

FEATURES:
Double acting cylinder design with 5-part oil seals for smooth operation and a tight seal
Welded heavy steel plate frame for greater rigidity
All electrical controls are low voltage (24V)
Preset and factory-sealed relief valve to prevent exceeding pressure capacity
Ram has lifting eyes that attach a chain to hydraulically move the table
2 HP submerged motor drives two centrifugal pumps for quiet, steady oil flow
Smooth, responsive control valve
Rapid advance of the ram to the workpiece – speed shifts automatically when contact is made

STANDARD EQUIPMENT:
Frame
2 Steel Table Plates
Lifting Chain
Workhead
Pressure Gauge
Safety Relief Valve

We use cookies to improve your experience. Privacy Policy.

Accept