Equipment
Hydraulic Presses
Compression Molding Press
Used 50 Ton PHI Hydraulic Molding & Laminating Press
Sold

Used 50 Ton PHI Hydraulic Molding & Laminating Press

Sell Your PHI S50MR-243-14-Y4-C
Compression Molding Press
Manufacturer:
PHI
Model:
S50MR-243-14-Y4-C
Stock #:
29456
Serial #:
6478
50 Ton PHI, 4 post, upstroke, 18" x 12" heated platens, #29456
Tonnage50 T45.359 t
Heating ElementElectricElectric
# of Openings11
Design4 Post4 Post
Up or Downstroke?UpstrokeUpstroke
Heated Platen (L-R)18"457.2 mm
Heated Platen (F-B)12"304.8 mm
Bed (L-R)21 in
Bed (F-B)14 in
Stroke6"152.4 mm
Daylight16"406.4 mm
IPM Closing60 in/min.152.4 cm/min.
IPM Pressing3.5 in/min.8.9 cm/min.
IPM ReturnGravity returnGravity return
Dimensions48 L-R x 32 F-B x 65 H48 L-R x 32 F-B x 65 H
Weight2500 lbs2500 lbs

USED 50 TON PHI HYDRAULIC MOLDING & LAMINATING PRESS
Model S50MR-243-14-Y4-C
4 post upstroke type
Floor standing
Distance between 2.7" dia. posts: 21" L-R x 7" F-B
Platen area (nominal): 21" L-R x 14" F-B
Overall dimensions of platen: 28" L-R x 14" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 16" maximum
Daylight opening between
hot plates (1): 10" maximum
Hot plates (2): 18" L-R x 12" F-B x 2" thick
(Electrically heated to 600° F -
water cooled)
Insulation (2): 18" L-R x 12" F-B x 1" thick
Main ram diameter (1): 6.5" @ 3000 PSI - 50 tons
Floor to top of moving platen: 42"
Power unit (base of press): Vickers model V21011W1012S214
hydraulic pump
Racine model 20H hydraulic pump
Both driven by 1-1/2 HP 1200 RPM
220/440/3/60 D.E. motor
Speeds approx.: 60"/minute closing
3.5"/minute pressing to 50 tons
Gravity return
Weight approx. 2500 lbs.
Overall dimensions approx. 48" L-R x 32" F-B x 65" H
Serial no. 6478
Stock no. 29456
FOB ELK GROVE VILLAGE, IL

Controls:
Pushbutton operation with stroke & pressure control
Dual palm buttons
Preheat, cure & cool cycle timers
(2) temperature indicating controllers
Pressure gauge

We use cookies to improve your experience. Privacy Policy.

Accept