Equipment
Hydraulic Presses
Compression Molding Press
Used 75 Ton Wabash Model 75-1515-SM Hydraulic Molding Press
Sold

Used 75 Ton Wabash Model 75-1515-SM Hydraulic Molding Press

Sell Your WABASH 75-1515-SM
Compression Molding Press
Manufacturer:
WABASH
Model:
75-1515-SM
Condition:
Good
Stock #:
29342
Serial #:
7636
75 Ton Wabash 75-1515-SM, 4 post, upstroke, 15" x 15" steel plates, 8" str., 16" DL, #29342
Tonnage75 T68.039 t
Heating ElementNoneNone
# of Openings11
Design4 Post4 Post
Up or Downstroke?UpstrokeUpstroke
Heated Platen (L-R)15" steel plate (unheated)381 mm
Heated Platen (F-B)15" steel plate (unheated)381 mm
Bed (L-R)18 in
Bed (F-B)16 in
Stroke8"203.2 mm
Daylight16"406.4 mm
IPM Closing50 in/min.127 cm/min.
IPM Pressing2 in/min.5.1 cm/min.
IPM Return60"/minute return60"/minute return
Dimensions45" L-R x 40" F-B x 69" H45" L-R x 40" F-B x 69" H
Weight3100 lbs.3100 lbs.

USED 75 TON WABASH MODEL 75-1515-SM HYDRAULIC MOLDING PRESS
Model 75-1515-SM
4 post upstroke type; floor standing
Distance between 2" dia. posts: 19" L-R x 9" F-B
Platen area (nominal): 18" L-R x 16" F-B
Overall dimensions of platen: 25" L-R x 16" F-B
Stroke of fully guided platen: 0-8" maximum
Daylight opening (total): 20" maximum
Daylight opening between
steel plates (1): 16" maximum
Steel plates (2): 15" L-R x 15" F-B x 2" thick
Main ram diameter(1): 8"/3.5" @ 2985 PSI – 75 tons
Floor to top of moving platen: 41"
Power unit (base of press): Hydraulic pump, driven by
3 HP 1750 RPM 230/460/3/60 motor
Speeds approx.: 50"/minute closing
2"/minute pressing to 75 tons
60"/minute return
Weight approx. 3100 lbs.
Overall dimensions approx. 45" L-R x 40" F-B x 69" H
Serial no. 7636
Stock no. 29342
FOB ELK GROVE VILLAGE, IL

Specifications are accurate to the best of our knowledge, subject to verification.

Controls:
Pushbutton operation with stroke & pressure control
Dual palm buttons
Electric contact pressure gauges

We use cookies to improve your experience. Privacy Policy.

Accept