Equipment
Hydraulic Presses
Compression Molding Press
Used 30 Ton Wabash 30-152TMB Heated Platen Press
Sold

Used 30 Ton Wabash 30-152TMB Heated Platen Press

Sell Your WABASH 30-15-2TMB
Compression Molding Press
Manufacturer:
WABASH
Model:
30-15-2TMB
Condition:
Good
Stock #:
29331
Serial #:
3439
30 Ton Wabash #30-152TMB, 4 post, upstroke, 15" x 15" hot plates, 6" str., 4"-10" DL, #29331
Tonnage30 T27.216 t
Heating ElementElectricElectric
# of Openings11
Design4 Post4 Post
Up or Downstroke?UpstrokeUpstroke
Heated Platen (L-R)15"381 mm
Heated Platen (F-B)15"381 mm
Bed (L-R)16.5 in
Bed (F-B)7.5 in
Stroke6"152.4 mm
Daylight4"-10" between hot plates254 mm
IPM Closing35 in/min.88.9 cm/min.
IPM Pressing3 in/min.7.6 cm/min.
IPM Return50"/minute return50"/minute return
Dimensions38" L-R x 22" F-B x 78" H38" L-R x 22" F-B x 78" H
Weight1400 lbs.1400 lbs.

USED 30 TON WABASH MODEL #30-152TMB HYDRAULIC MOLDING & LAMINATING PRESS
Model 30-152TMB
4 post upstroke type; floor standing
Distance between 1.25" dia. posts: 16.5" L-R x 7.5" F-B
Platen area(nominal): 15" L-R x 15" F-B
Stroke of fully guided platen: 0-6" maximum
Daylight opening(total): 9"-15" maximum (adjustable)
Daylight opening between
hot plates(1): 4"-10" maximum (adjustable)
Hot plates(2): 15" L-R x 15" F-B x 2" thick
(electrically heated to 600° F)
Insulation(2): 15" L-R x 15" F-B x 1" thick
Main ram diameter(1): 5"/2" @ 3055 PSI - 30 tons
Floor to top of moving platen: 42"
Power unit (base of press): Hydraulic pump, driven by
1/2 HP 1725 RPM 220/440/3/60 motor
Speeds approx.: 35"/minute closing
3"/minute pressing to 30 tons
50"/minute return
Weight approx. 1400 lbs.
Overall dimensions approx. 38" L-R x 22" F-B x 78" H
Serial no. 3439
Stock no. 29331
FOB ELK GROVE VILLAGE, IL

Specifications are accurate to the best of our knowledge, subject to verification.

Controls:
Hand lever for open, hold, close
(2) temperature controllers
(2) pressure gauges

We use cookies to improve your experience. Privacy Policy.

Accept