Equipment
Hydraulic Presses
Heated Platen Press and Laminating Press
Used 140 Ton Hydraulic Molding & Laminating Press
Sold

Used 140 Ton Hydraulic Molding & Laminating Press

Sell Your Four Post Molding Press with Shuttle Table
Heated Platen Press and Laminating Press
Manufacturer:
Four Post
Model:
Molding Press with Shuttle Table
Condition:
Good
Stock #:
29089
140 Ton Hydraulic Molding Press with shuttle table, 4 Post, Upstroke, 8" Str, 15" DL, 20" x 20" Ht Plts, #29089
Tonnage140 T127.006 t
Heating ElementElectricElectric
# of Openings11
Design4 Post4 Post
Up or Downstroke?UpstrokeUpstroke
Heated Platen (L-R)20"508 mm
Heated Platen (F-B)20"508 mm
Bed (L-R)24 in
Bed (F-B)19.5 in
Stroke8"203.2 mm
Daylight15"381 mm
Dimensions72" L-R x 78" F-B x 74" H72" L-R x 78" F-B x 74" H
Weight9,500#9,500#

USED 140 TON HYDRAULIC MOLDING & LAMINATING PRESS
With shuttle table
4 post upstroke type; floor standing
Distance between 4.25" dia. posts: 24" L-R x 8" F-B
Platen area (nominal): 24" L-R x 19.5" F-B
Stroke of fully guided platen: Approx. 0 - 8" maximum
Daylight opening (total): 15" maximum
Daylight opening between
hot plates(1): 8" maximum
Hot plates(2): 20" L-R x 20" F-B
(electrically heated)
Insulation(2): 20" L-R x 20" F-B
Main ram diameter(1): 12"/10" @ 2500 PSI - 140 tons
Floor to top of shuttle table: 38"
Power unit (base of press): Vickers hydraulic pump, driven by
10 HP 1150 RPM 230/460/3/60 motor

Weight approx. 9,500#
Overall dimensions approx. 72" L-R x 78" F-B x 74" H
Serial no. N/A
Stock no. 29089
FOB ELK GROVE VILLAGE, IL

Specifications are accurate to the best of our knowledge, subject to verification.

Shuttle Table

Controls:
Pushbutton operation with stroke & pressure control
Dual palm buttons
Selector switch for manual or semi-automatic operation
Cycle timer, bump timer, bump counter, bump decay
(2) digital temperature indicating controllers
Pressure gauge

We use cookies to improve your experience. Privacy Policy.

Accept