Used 150 Ton TMP Hydraulic Molding & Laminating Press

USED 150 TON TMP HYDRAULIC MOLDING & LAMINATING PRESS
4 post upstroke type, floor standing
Distance between 3" dia. posts: 22" L-R x 12" F-B
Platen area (nominal): 22" L-R x 20" F-B
Overall dimensions of platen: 29" L-R x 20" F-B
Stroke of fully guided platen: 0 - 12" maximum
Daylight opening (total): 20" maximum
Daylight opening between hot
plates (1): 14" maximum
(8.5" maximum with current setup)
Hot plates (2): 20" L-R x 20" F-B x 2.5" thick
(electrically heated)
Insulation (2): 20" L-R x 20" F-B x .5" thick
Main ram diameter (1): 10"/7" @ 3820 PSI - 150 tons
Floor to top of moving platen: 40"
Power unit (base of press): Gerotor hydraulic pump &
Racine hydraulic pump, both driven by
3 HP 1800 RPM 220/440/3/60 motor
Controls: Pushbutton operation with stroke &
pressure control
Dual palm buttons
Selector switch for manual or
semi-automatic operation
Cycle timer, bump timer, bump counter
(2) temperature controllers
Pressure gauge
Weight approx. 6500 lbs.
Overall dimensions approx. 48" L-R x 40" F-b x 71" H
Serial no. N/A
Stock no. 29071
FOB ELK GROVE VILLAGE, IL