Sold

Used 75 Ton Wabash Hydraulic Molding & Laminating Press

Heated Platen Press and Laminating Press
Manufacturer:
WABASH
Model:
4-POST
Condition:
Good
Stock #:
28651
75 Ton Wabash, 4 Post, Upstroke, 18" x 18" hot plates, 8" str., 14"-19" DL, #28651
Tonnage75 T68.039 t
Heating ElementElectricElectric
# of Openings11
Design4 Post4 Post
Up or Downstroke?UpstrokeUpstroke
Heated Platen (L-R)18"457.2 mm
Heated Platen (F-B)18"457.2 mm
Bed (L-R)20 in
Bed (F-B)19 in
Stroke8"203.2 mm
Daylight19"482.6 mm

USED 75 TON WABASH HYDRAULIC MOLDING & LAMINATING PRESS
4 post upstroke type; floor standing
Distance between 2.5" dia. posts: 22" L-R x 10.5" F-B
Platen area(nominal): 20" L-R x 19" F-B
Overall dimensions of platen: 30" L-R x 19" F-B
Stroke of fully guided platen: 0-8" maximum
Daylight opening(total): 14"-19" maximum
Daylight opening between
hot plates(1): 9-14" maximum
Hot plates(2): 18" L-R x 18" F-B x 2" thick
(electrically heated to 600° F -
water cooled)
Main ram diameter(1): 8"/3.5" @ 2985 PSI - 75 tons
Floor to top of moving platen: 40"
Power unit (base of press): Rexroth hydraulic pump, driven by
3 HP 1750 RPM 230/460/3/60 motor
Weight approx. 5000 lbs.
Overall dimensions approx. 55" L-R x 52" F-B x 76" H
Serial no. N/A
Stock no. 28651
FOB ELK GROVE VILLAGE, IL

Specifications are accurate to the best of our knowledge, subject to verification.

This equipment has been sold. Similar equipment available now is shown below.

Loading...