USED 50 TON PHI MOLDING & LAMINATING PRESS

50 TON PHI MOLDING & LAMINATING PRESS
Hydraulic
Model S50MR-243-14-Y4-C
4 post upstroke type
Floor standing
Distance between 2.7" dia. posts: 21" L-R x 7" F-B
Platen area (nominal): 21" L-R x 14" F-B
Overall dimensions of platen: 28" L-R x 14" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 16" maximum
Daylight opening between
hot plates (1): 10" maximum
Hot plates (2): 18" L-R x 12" F-B x 2" thick
(Electrically heated to 600° F -
water cooled)
Insulation (2): 18" L-R x 12" F-B x 1" thick
Main ram diameter (1): 6.5" @ 3000 PSI - 50 tons
Floor to top of moving platen: 42"
Power unit (base of press): Vickers model V21011W1012S214
hydraulic pump
Racine model 20H hydraulic pump
Both driven by 1-1/2 HP 1200 RPM
220/440/3/60 D.E. motor
Speeds approx.: 60"/minute closing
3.5"/minute pressing to 50 tons
Gravity return
Controls: Pushbutton operation with stroke &
pressure control
Dual palm buttons
Preheat, cure & cool cycle timers
(2) temperature indicating
controllers
Pressure gauge
Weight approx. 2500#
Overall dimensions approx. 48" L-R x 32" F-B x 65" H
Serial no. 6478
Stock no. 25979
FOB ELK GROVE VILLAGE, IL
KIWLRL