USED 50 TON PHI HYDRAULIC MOLDING & LAMINATING PRESS

50 TON PHI HYDRAULIC MOLDING & LAMINATING PRESS
Model 50R1818S-3ECS-M-YS8-G
4 post upstroke type
2 opening
Floor standing
Distance between 2.5" dia. posts: 21" L-R x 11" F-B
Platen area (nominal): 19" L-R x 19" F-B
Overall dimensions of platen: 28" L-R x 19" F-B
Stroke of fully guided platen: 0 - 6" maximum
Daylight opening (total): 10" - 18" maximum
Daylight opening between
hot plates (2): 1" - 4.5" maximum each
Hot plates (3): 18" L-R x 18" F-B x 2.5" thick
(Electrically heated to 450° F. -
water cooled)
Insulation (2): 18" L-R x 18" F-B x .5" thick
Main ram diameter (1): 6.5" @ 3000 PSI - 50 tons
Floor to top of moving platen: 44"
Power unit (base of press): Vickers hydraulic pump, driven by
1 HP 1800 RPM 208/230/460/3/60 motor
Racine hydraulic pump, driven by
1 HP 1200 RPM 208/230/460/3/60 motor
Speeds approx.: 29"/min. closing
1.6"/min. pressing to 50 tons
Gravity return
Controls: Pushbutton operation w/stroke &
pressure control
Dual palm buttons
Selector switch for manual or
semi-automatic operation
Cure timers for preheat, cure, cool
(3) temperature controllers
Low & high pressure gauges
Weight approx. 3800#
Overall dimensions approx. 56" L-R x 40" F-B x 74" H
Serial no. 74-8-007
Stock no. 25683
FOB ELK GROVE VILLAGE, IL
KIWLFD