USED 28 TON HULL HYDRAULIC TRANSFER MOLDING PRESS

USED 28 TON HULL HYDRAULIC TRANSFER MOLDING PRESS
Model 359d
4 post upstroke type
Floor standing
Cabinet style
With 8 ton top transfer
Distance between 1.75" dia. posts: 18.75" L-R x 9.25" F-B
Platen area (nominal): 18.75" L-R x 18" F-B
Stroke of fully guided platen: 0 - 6" maximum
Stroke of hydraulic transfer ram: 0 - 8" maximum
Daylight opening (total): 21" maximum
Daylight opening between hot plates: (1): 7.5" maximum w/current setup
Hot plates (2): 17" L-R x 12" F-B x 2" thick
(electrically heated)
Insulation (2): 17" L-R x 12" F-B x 1" thick
Bottom ejector rod spacings: 17.5" L-R
Main ram diameter (1): 6"/4" @ 2000 psi - 28 tons
Transfer ram diameter (1): 3.25"/2" @ 2000 psi - 8 tons
Floor to top of moving platen: 46"
Power unit (base of press): Geroter model H3-H8-F-10B1
hydraulic pump, driven by
5 HP 1170 RPM 220/440/3/60 motor
Speeds approx.: CLAMP TRANSFER
300"/minute closing 460"/minute closing
0-35"/minute pressing to 28 tons 0-125"/minute pressing to 8 tons
240"/minute return 725"/minute return
Controls: Pushbutton operation w/stroke, pressure & speed control
Dual palm buttons
Selector switch for manual or semi-automatic operation
Cycle timers for close, breathe, dwell & cure
(2) temperature controllers
Mold heater receptacles
Pressure gauges
Weight approx. 4000 lbs.
Overall dimensions approx. 60" L-R x 36" F-B x 98" H
Serial no. 2378
Stock no. 27665
FOB ELK GROVE VILLAGE, IL
KIWLRE