USED 2" X 2" X 1/4" BUFFALO ANGLE BENDING MACHINE

USED 2" X 2" X 1/4" BUFFALO ANGLE BENDING MACHINE
Model 1/2VBR with leg-in & leg-out attachment
Capacities:
Angles - leg out: 2" x 2" x 1/4" - min. dia. 20" mild steel
Angles - leg in: 1.5"x1.5"x1.25" - min. dia. 18" mild steel
Smallest angle - leg out: 3/4"x3/4"x1/8" - min. dia. 8" mild steel
Smallest angle - leg in: 3/4"x3/4"x1/8" - min. dia. 9" mild steel
Beams on flanges: 3" @ 7.5# - min. dia. 24" mild steel
Channels - flanges out: 3" @ 4# - min. dia. 16" mild steel
Flats on edge: 2" x 3/8" - min. dia. 24" mild steel
Flats on flat: 3" x 3/4" - min. dia. 20" mild steel
Rounds: 1.5" - min. dia. 20" mild steel
Squares: 1.25" - min. dia. 20" mild steel
Copper tubes (12 ga.) 1-3/4" - min. dia. 16" mild steel
Copper tubes (16 ga.) 2" - min. dia. 16" mild steel
Standard steel pipe: 1.5" maximum size
X-heavy pipe: 1.25" maximum size
XX-heavy pipe: 1" maximum size
Diameter of angle rolls: 7"
Diameter of upper shaft: 3"
Diameter of lower shaft: 2.5"
RPM of rolls: 22
Speeds approx.: 40 FPM
EQUIPPED WITH: Hydraulic adjustment of top roll with
pushbutton control & position indicator
Pushbuttons for start - stop
Drum switch for forward - off - reverse
One shot oil lubrication
3 HP 1725 RPM 230/460/3/60 hydraulic pump
motor
5 HP 1730 RPM 230/460/3/60 motor
Weight approx. 3100 lbs.
Overall dimensions approx. 72" L-R x 55" F-B x 47" H
Serial no. 73U6549
Stock no. 27924
FOB ELK GROVE VILLAGE, IL
1CWLFN