200 Ton WABASH 200H-30-BP Heated Platen Press
ConditionUsed
1 available
200 Ton Wabash, Model 200H-30-BP, 30" x 30" (electrically heated to 650 degrees), 12" stroke, 24" daylight, NEW 1997
WABASH VANTAGE Series Hydraulic Compression Press, Model 200H-30-BP, including the following standard features:
CLAMP SPECIFICATIONS
- 200 ton compression force (adjustable)
- 30" L-R x 30" F-B fully guided heated platens
- Cartridge heaters
- Full platen insulation, including perimeter
- Single opening with:
- 12" - 24" open daylight (adjustable)
- 0" - 12" closed daylight (shut height)
- 12" stroke clamp cylinder for power in both directions
- 42" lower platen operating height (approximate)
HYDRAULIC SYSTEM
- Self-contained, energy-efficient hydraulic system, including:
- TEFC motor
- Variable-volume, pressure-compensated, hydraulic pump
- 75 gallon reservoir with access panel and gauge for oil level and temperature indication
- Suction line strainer
- Water-cooled heat exchanger
- 10 micron absolute return line cartridge filter
CONTROL SYSTEM
- NEMA-rated electrical control enclosure, including:
- Programmable controller with access module
- Operating buttons, including two hand "anti-tie-down" circuit for cycle initiation
- Indicating lights
- Proximity switches to control "slow close" position and "cycle reset"
- Clamp pressure relief valve and gauge
- 460/3/60 supply voltage
ADDITIONAL FEATURES
- Electrically heated platens package, including:
- 650°F maximum operating temperature, sized for 15°F/minute heat-up rate
- Cartridge heaters
- Platen insulation, including perimeter
- 1/4 DIN digital temperature controllers
- Pressing speed control
- Automatic "bump" ("breathe") sequence
ELECTRICAL REQUIREMENTS:
74 FLA @ 460/3/60
WATER REQUIREMENTS:
5 GPM @ 50 psi and 70°F
COMPRESSED AIR REQUIREMENTS:
5 SCFM @ 80 psi (intermittent)
(Required for platen cooling only)
Overall Dimensions (W x D x H) 76" x 36" x 80" (approximate)
Approximate Weight 17,500 lbs
200 Ton Wabash, Model 200H-30-BP, 30" x 30" (electrically heated to 650 degrees), 12" stroke, 24" daylight, NEW 1997
Imperial
| Tonnage | 200 T |
| Heating Element | Electric |
| Design | 4 Post |
| Up or Downstroke? | Upstroke |
| Heated Platen (L-R) | 30" |
| Heated Platen (F-B) | 30" |
| Bed (L-R) | 30 in |
| Bed (F-B) | 30 in |
| Stroke | 12" |
| Daylight | 24" |
WABASH VANTAGE Series Hydraulic Compression Press, Model 200H-30-BP, including the following standard features:
CLAMP SPECIFICATIONS
- 200 ton compression force (adjustable)
- 30" L-R x 30" F-B fully guided heated platens
- Cartridge heaters
- Full platen insulation, including perimeter
- Single opening with:
- 12" - 24" open daylight (adjustable)
- 0" - 12" closed daylight (shut height)
- 12" stroke clamp cylinder for power in both directions
- 42" lower platen operating height (approximate)
HYDRAULIC SYSTEM
- Self-contained, energy-efficient hydraulic system, including:
- TEFC motor
- Variable-volume, pressure-compensated, hydraulic pump
- 75 gallon reservoir with access panel and gauge for oil level and temperature indication
- Suction line strainer
- Water-cooled heat exchanger
- 10 micron absolute return line cartridge filter
CONTROL SYSTEM
- NEMA-rated electrical control enclosure, including:
- Programmable controller with access module
- Operating buttons, including two hand "anti-tie-down" circuit for cycle initiation
- Indicating lights
- Proximity switches to control "slow close" position and "cycle reset"
- Clamp pressure relief valve and gauge
- 460/3/60 supply voltage
ADDITIONAL FEATURES
- Electrically heated platens package, including:
- 650°F maximum operating temperature, sized for 15°F/minute heat-up rate
- Cartridge heaters
- Platen insulation, including perimeter
- 1/4 DIN digital temperature controllers
- Pressing speed control
- Automatic "bump" ("breathe") sequence
ELECTRICAL REQUIREMENTS:
74 FLA @ 460/3/60
WATER REQUIREMENTS:
5 GPM @ 50 psi and 70°F
COMPRESSED AIR REQUIREMENTS:
5 SCFM @ 80 psi (intermittent)
(Required for platen cooling only)
Overall Dimensions (W x D x H) 76" x 36" x 80" (approximate)
Approximate Weight 17,500 lbs
We use cookies to improve your experience. Privacy Policy.