Used 75 Ton Hull Transfer Molding Press With Shuttle Table

USED 75 TON HULL TRANSFER MOLDING PRESS WITH SHUTTLE TABLE
w/12.5 ton top transfer & shuttle
Model 359G
Hydraulic; 4 post downstroke type; floor standing
Distance between 2.25" dia. posts: 14" L-R x 23.75" F-B
Platen area (nominal): 14" L-R x 29" F-B or
23" L-R x 20.5" F-B
Die space: 20" L-R x 20" F-B
Stroke of fully guided platen: 0 - 9" maximum
Stroke of hydraulic transfer ram: 0 - 8.5" maximum
Daylight opening over shuttle (total): Approx. 24" maximum
Daylight opening between
hot plates(1): 13.5" maximum (9" max. with spacer)
Hot plates(2): 20" L-R x 20" F-B
(electrically heated)
Main ram diameter(1): 8"/5.5" @ 2984 PSI - 75 tons
Transfer ram diameter(1): 4"/2.5" @ 1990 PSI - 12.5 tons
Floor to top of shuttle platen: 43"
Power unit (base of press): Vickers hydraulic pumps, driven by
10 HP 1745 RPM 230/460/3/60 motor
Speeds approx.: Clamp: Transfer:
250"/minute closing 500"/minute closing
0-27"/min. pressing to 75 tons 0-110"/min. pressing to 12.5 tons
200"/minute return 500"/minute return
Controls: Pushbutton operation w/stroke & pressure control
Dual touch palms
Cycle timer: close & cure, dwell, breath, close
Temperature controllers
Pressure gauges
Weight approx. 9,000#
Overall dimensions approx. 80" L-R x 90" F-B x 103" H
Serial no. 79A4918
Stock no. 28862
FOB ELK GROVE VILLAGE, IL