Used 220 Ton Schuler Hydraulic Press

USED 220 TON SCHULER HYDRAULIC PRESS - MFD. 2001
Model No. HPDZb200
69.4 Ton Capacity Bed Cushion with 17.7" Stroke, CNC Controlled
3.3 Ton Ejector in Ram with 9.45" Ejector Stroke
Bed Size: 63" x 55" T-Slotted
Ram Face: 63" x 55" T-Slotted
Ram Stroke: 35.4"
Maximum Daylight: 36" Over 9" Thick Bolster Plate
Windows: 24" Wide
Maximum Ram Speed: 15.75 Inches Per Second (945 IPM)
Minimum Ram Speed: 1.85 Inches Per Minute
Maximum Weight of Upper Die: 6,615 Lbs.
Maximum Offset Ram Load
Left & Right: 147,520 Lbs.
Maximum Offset Ram Load
Front & Back: 73,760 Lbs.
Allen Bradley Versa View 1500 PLC Control, Pendant Mounted
Snap Thru Dampening
200 HP, 3 Phase, 60 Cycle, 480 Volt Main Hydraulic Pump Motor
EQUIPPED WITH: Heat Exchanger & Oil Cooler

SCHULER FEED LINE
Feeding from Back to Front
Schuler Servo Roll Feed, New 2001, Type WV-KR-160-1050
Strip Width: 6" Minimum to 36" Maximum
Strip Thickness: .035" Minimum to .055" Maximum
Feed Length: .004" Minimum to 393.7" Maximum
Power Adjustable Passline Height
Power Elevation to Material Infeed Tray Rollers
Siemens Servo Drive Motor

SCHULER STRAIGHTENER - MFD. 2001
Model RCS-6-70/160-1050
Strip Width: 6" Minimum to 36" Maximum
Strip Thickness: .035" to .055" Maximum
(6) Straightening Rolls with Manual Adjustment & Dials
Indicator Readout

EQUIPPED WITH:
Pinch Rolls on Exit Side
Materials Width Guide Rollers w/Manual Adjustment
Top Half of Straightener has Power Lift for Material Loading &
Maintenance
Power Raise & Lower to Material Infeed Tray & Rollers
Loop Control Arm
3.7 KW SEW Eurodrive Motor, Wired 3 Phase, 60 Hz, 277-480 Volts

SCHULER MOTORIZED UNCOILER, MFD. 2001
Type HES-12-1000
10,000 Lb. Weight Capacity
Strip Width: 6" Minimum to 36" Maximum
Maximum Coil O.D.: 43.3"
Power Expansion Range: 18.5" to 20.9"
(6) Coil Keeper Arms
Hold Down Arm, Hydraulic Raise & Lower with Adjustable Pressure

SCHULER MOTORIZED COIL ARM with:
(2) 100" Long Sections of Track

SCHULER OPERATOR CONTROL CONSOLE for the Feed Line with:
Hand Held Pendant, Auto Threading & Job Memory

SPR-2000 SPROLLER STOCK LUBRICATOR

DIMENSIONS:
Press Laying Down: 233" L x 127" W x 86" H x 59,000 Lbs.
Hydraulic System: 11' L x 5-1/2' W x 9' H x 11,000 Lbs.
Servo Roll Feed: 82" F-B x 78" L-R x 83" H x 5,900 Lbs.
Straightener: 100" F-B x 70" L-R x 80" H x 6,100 Lbs.
Uncoiler: 78"L x 60"W x 112"H w/Hold Down Arm Raised x 4,800 Lbs
Skid with Fence Enclosure for Feed Line: 160" L x 84" W x 44" H
Hydraulic System for Uncoiler Sitting on Skid:
45" L-R x 48" F-B x 24" H
Electric Control Cabinet with AC Unit: 126" L x 30" W x 89" H
Schuler Electric Switchgear Cabinet, 480 Volts:
71" L x 21" W x 89" H
Skid with Stock Lubricator & Feedline Pendant Control:
45" L-R x 48" F-B x 24" H
Schuler Operator Control Console Laying Down on Skid:
43" L-R x 33" F-B x 24" H
Catwalk, Ladder & Support Legs Banded Together:
10' L x 63" W x 70" H
Catwalk, Misc. Hydraulic Lines & PLC Control: 136"L x 39"W x 53"H
Skid with Support Legs Banded Together: 13' L x 4' W x 4' H
Skid with Misc. Banded to Skid: 60" L x 40" W x 12" H x 100 Lbs.
Skid with Radiator: 48" L x 45" W x 12" H x 100 Lbs.
Coil Car: 67" L x 65" W x 29" H
(2) 100" Long Pieces of Track for Coil Car: 100" L x 5" W x 2" H
Plastic Basket with Wiring: 32" L x 30" W x 36" H
Skid with Press Cushion: 4' L x 4' W x 33" H
Wire Basket with Hydraulic Lines & Operator Pedestal:
48" L x 40" W x 36" H
Serial no. H/7610
Stock no. 27967
FOB PENNSYLVANIA SHIPPING POINT