USED 75 TON PHI MOLDING & LAMINATING PRESS

USED 75 TON PHI MOLDING & LAMINATING PRESS
Hydraulic
Model 75R2418S-3HCS-P-YS8-R
4 post upstroke type
2-opening
Floor standing
Distance between 2.5" posts: 28" L-R x 12" F-B
Platen area (nominal): 28" L-R x 19" F-B
Overall dimensions of platen: 35" L-R x 19" F-B
Stroke of fully guided platen: Approx. 0 - 6" maximum
Daylight opening (total): 16.5" maximum
Daylight opening between hot plates (2): 4" maximum each
Hot plates (3): 24" L-R x 18" F-B x 2" thick
(electrically heated to 600° F. -
water cooled)
Insulation (2): 24" L-R x 18" F-B x 1" thick
Main ram diameter (1): 8" @ 2985 PSI - 75 tons
Floor to top of moving platen: 43"
Power unit (base of press): Vickers hydraulic pump, driven by
1 HP 1800 RPM 230/460/3/60 motor
Nachi hydraulic pump, driven by
2.5 HP 1200 RPM 230/460/3/60 motor
Speeds: 52"/minute closing
5"/minute pressing to 75 tons
Gravity return
Controls: Pushbutton operation w/stroke &
pressure control
Dual palm buttons
Cycle timers: low pressure,
high pressure, cool
(3) digital temperature
indicating controllers
Low & high pressure gauges
Weight approx. 5,500 lbs.
Overall dimensions approx. 60" L-R x 48" F-B x 76" H
Serial no. 83-3-016
Stock no. 27892
FOB ELK GROVE VILLAGE, IL
KIWLUN