USED 8 FT. X 10 GA. PACIFIC J90-8 CNC BRAKE Model no. J90-8 Bending capacity: 8' x 10 ga. mild steel 7'6" x 3/16" mild steel Tonnage capacity: 90 tons Overall length of bed & ram: 8' Distance between housings: 6'6" Stroke: 7" Open height: 13" Closed height: 6" Throat depth: 6" Width of bed: 6" Floor to top of bed: 34" Speeds approx.: 160"/minute rapid advance 75"/minute forming 12"/minute anti-whip 143"/minute rapid return EQUIPPED WITH: 24" Hurco Autobend 7 three axis back gauge 4" high die rail Free standing control with dual palm buttons & emergency stop button Electric foot switch Pushbuttons for start - stop Key selector switches for hand - foot, inch - off - single stroke manual return - auto return, advance speed medium - low - high - medium, high - low, down stroke off - on, return stroke off - on Stroke length adjustment Ram tilt adjustment Fine tilt adjustment Tonnage control via knob Sectional ram die clamps Centro-Matic one shot oil lubrication Dovetail slots in front & back of bed Hydraulic pump, driven by 20 HP 1750 RPM 230/460/3/60 motor Weight approx. 11,000 lbs. Overall dimensions approx. 118" L-R x 56" F-B x 113" H Serial no. A505 Stock no. 29079 FOB ELK GROVE VILLAGE, IL TYWLUF